Installing with a Hardware (HASP) Key
| Info |
|---|
Insert your hardware key (a small USB drive) into a USB port on the computer you intend to use eXtyles on before trying to install eXtyles. |
First-time installation
The first time you install your keyed version of eXtyles you will first need to make sure that you have HASP drivers installed on your machine.
Download the HASP drivers from http://www.extyles.com/drivers/HASP_drivers_latest.zip.
Make sure your hardware key is inserted into a USB port on the PC.
Unzip the downloaded drivers from step 1.
Inside the resulting folder Sentinel_HASP_Run-time_setup, double click the file HASPUserSetup.exe.
Reboot your PC. At this point, a red light should be glowing on the end of the hardware key; if not, contact eXtyles technical support.
You can then continue to install eXtyles as described here.
